KTPK Taiga advantages

Complete transformer substations are manufactured by the same producer as BEMP LLC is a producer of high voltage switchgear (KSO-190 Iva) and low voltage switchgear (RUNN Olkha) and of block-containers.

1. Main technical features of the block-module:

• Common module having dimensions that do not need any special transportation;
• Possibility to move substation in case of relayout;
• Heat insulation and heating of the module provide substation operation at -60 degrees Celsius and protect from sweating inside the compartment;
• High degree of protection from outsiders breakthrough;
• Aesthetic dressing design of substation;

2. Main technical features of high voltage switchgear on the base of KSO-190 Iva:

• modern, compact KSO-190 Iva, design of the year 2004;
• The case of the cubicle is made of galvanized steel and on the outside is painted by powder paint therefore it cannot be corroded and doesn't require coloration during the operation life. All parts are joined be the strong screws carrying heavy dynamic loads at the short currents and transportation;
• Cubicles are equipped by capacitive voltage dividers and bus bar voltage indicators that improves safety level and probability of servicers' mis-action and enables to carry out phasing at low voltage;
• The doors of the cubicles are equipped by the hinges that provides doors' blocking at arc localization;
• At the back panel of the cubicle there are unloading valves activated by the short circuit arc inside the cubicle and prevented the damage of the cubicle;
• Arc extinction chambers enable to extinguish the arc effectively in limited volume. Fixed contact that is situated inside the upper bell isolator is automatically hided by the shutter after the switching off;
• Cubicles are fitted both with roll-out and stationary installed circuit-breakers;
• Cubicles are equipped by vacuum circuit breaker manufactured by: «Schneider Electric» (France); «Tavrida Electrik»; «VEI» (Italy).

3. Main technical features of low voltage switchgear on the base of RUNN Olkha:

• Each cabinet has a modular construction and assembled from serially produced components. Wide capabilities of the modules enables to create any configurations of the switchgears;
• The cabinet is devided into compartments: bus bar compartment, functional equipment department, cable connections and control circuits pathways. Each department has a seal rating according to GOST 14254-IP20;
• On request of the customer cabinets are equipped by switching units manufactured by «OEZ», «Schneider Electric», «ABB».
• Metallic body of RUNN Olkha is made of galvanized steel on the outside is painted by powder paint;
• Modular structure of the cabinet enables to change or re-equip the module without RUNN Olkha disconnection.